Friday, January 28, 2011

More Home Renovation Means More Property Value

If you are embarking on a home renovation project, one area that deserves some attention is windows. This article will focus on how to replace the sliding glass windows in your home. The good news is that sliding glass window replacement is one of the easier tasks for first time home renovators to tackle by themselves, and it's the kind of project that offers nice returns on property value. So even if you do not have a lot of experience sawing and hammering, you should be able to manage the removal and installation without any major problems or setbacks.

The first thing you will need to do is obtain the new windows that are going to be taking the place of your old ones. When purchasing your new sliding glass window units, it is important to consider the make of the product that you currently have (keep in mind that this will usually include the frame as well as the glass itself). Check the window that you have for the manufacturer and contact this company about window replacement. If it is an obscure brand, you may need to order your replacement directly from the manufacturer, but if it is a relatively popular one, you might be able to find what you need at a local Olympia hardware or DIY store.

You will also want to check whether or not your old sliding windows operate using rollers. Many of the older models and some newer versions, as well. However, you might want to think about window replacement units that do not include these rollers. Many of the latest state of the art models being sold nowadays do not require them, relying instead on a track with a good fit, which allows the window to slide back and forth easily.

Once you have obtained your replacement windows, it is time to get started on the actual home improvement process. The first thing that you will need to take care of is removing the old windows. Start by taking out the screen. To do this, simply pull it gently out of position from either the bottom or the side. Then push the glass window into the middle of the frame so that it is neither completely open nor completely closed. Wearing gloves for protection, hold the window in place with one hand and slide the other between the sliding and stationary windows.

Now, lift the sliding window from the top while guiding the bottom of it out of the frame. Once the bottom part of the window is completely free, you should slowly lower the window again, freeing the rest of it from the frame as well. Then put it off to the side.

Your window replacement is now halfway complete. The next step is to clean the frame. Use an old rag and liquid window cleaner to wipe away any dirt and dust that may have accumulated. Then install the new unit by following the removal steps in reversal. Once your new sliding glass window is in place, clean it on both sides and put the screen back in.

Resource: Ezine Article

Wednesday, January 26, 2011

Ideas For Home Renovation - Veneer Panels

Changing the appearance of the inner and outer parts of a home can be a lot of work when it comes time to actually doing the renovations. It can be tough to figure out what you are trying to do and what kind of replacements you are looking to make. You can end up spending more money on stuff you don't really want when it's all said and done. Consider the possibility of putting veneer panels to work in your house before making the additions -or subtractions- you are planning. They may be able to help you change up the appearance of your house.

Lots to Choose From

When you go shopping for panels, you will be surprised at how many different varieties you will find at the store. Panels can come in natural stone and stone panels if you would like to make some pleasant additions outdoors. They can be done in ebony as well as oak if you would like wood to be used for your home and another benefit is that if you like you can decorate the interior of your house with the same panels in whatever 
trend you choose.

Not Costly At All

Another excellent benefit to the panels and your ability to use them is that they are very affordable. You can buy them cheaply while still giving your home a memorable make-over in a way that doesn't result in you needing to take out a loan from your bank. The fact that these panels are so durable is another advantage to taking them because not only are they cheap but they also last a long time. It is very much a win-win situation for homeowners who are interested in putting together a quality renovation at less cost.

Get The Style You Were Looking For

In terms of renovation, the variety that you can get with veneer panels make it possible to decorate your house in styles that are becoming increasingly popular with every passing day. Stone veneer panels are able to absorb a lot wear which makes them useful in that regard, but they are also attractive enough that someone walking in could easily be impressed with what you are managing to do. The panels can vary in thickness, material, size, and what ever specifications you would like. It's all up to you.

Renovating and making changes to a home is never easy but being undecided can make this sort of project even more difficult. As bad as spending too much can seem, homeowners should also be on guard against taking things that are too complicated or that lack variety when looking into making their own renovations. Veneer panels can save a lot of trouble for homeowners who just want to make a few changes. The panels come in many types, it is not especially costly to have one, and they can enhance the atmosphere you are looking to give a room. If you want an item that can make renovating much easier, your search can end here.

Resource: Ezine Article

Monday, January 24, 2011

Build a Boat Easily With Plywood Boat Plans

Plywood often make the best material for boat building. That's why I'm always on the lookout for good plywood boat plans as this material is the most commonly used and the easiest to procure when you want to build your own boat.

There are simply many wonders you can do with plywood. Building a boat is one such thing. Personally, I've always liked using plywood as it is really easy to cut and mold to certain specifications and dimension. This aspect alone of plywood makes it one of the best material boat building beginners can use with ease.
Furthermore, plywood is also known to be stable in terms of dimension. Which means that it does not contract or expand when exposed to extreme humidity and temperature

One thing you need to consider in building a plywood boat is the type and thickness of the ply. This information should be specified in the plans that you are using to build your boat. However, it's always good to go over the different types of plywood and know for yourself the advantages and drawbacks of using a specific type of ply and so you can use the one which suits your purposes best.

For example, okume has always been a widely popular material for plywood boat building. Its strength to weight ratio is ideal for boat building. It has one of the highest quality relatively speaking. However, its main drawback is that it is not specifically treated to resist rotting. Which is why you need to be thorough in applying varnish or epoxy all over the surface to seal it and prevent water from penetrating and causing the wood to rot.

Additionally, you need to choose which boat building technique you are going to use to build your boat. The easiest boat building method to build a plywood boat is stitch and glue. This is one of the most cost effective as well. With this method, you'll only be needing copper wire for stitching, epoxy glue for gluing and fiberglass to add some durability to your boat structure. For this method of boat building, it is quite imperative that the plywood is cut accurately.

However, that's not saying that stitch and glue is the only method I recommend. Depending on your skill set, you may also try different boat building techniques. One such technique is called ply over frame. This method can be more tedious that stitch and glue but it definitely has added durability because you will need to build a boat frame beforehand over which you will be gluing the plywood.

Whichever boat building technique you choose to employ, it is imperative that you use a very good plywood boat plan. It will definitely make the construction process less frustrating. Easy to implement plans will speed up the project and will likely help you keep the cost of building your own boat very low.

Resource: Ezine Article

Thursday, January 20, 2011

5 Reasons House Moving is Better Than House Building

Moving a residence is quite a task especially if it is being done literally. Many people ponder the reasons as to why someone would actually want to move a house to another location instead of just moving into a new one. This concept of moving a house to a different location may sound rare to the average person but in point of fact, house moving is an established business in the United States and large structures are transported all the time across the states. To answer those who question this very motive, this article will shed some light on the reasons why people move their actual place of residence from once location to another.

1. Emotional Attachment to Their Property

Many a times people are simply too attached to their property. After all it is a place where they spent a good portion of their life and they are just not willing to let it go no matter what. Even though moving a house can be a costly expenditure, these people are very close to their homes and will willingly take a financial hit if it would help them keep their existing place.

2. House Moving is sometimes Cheaper

Believe it or not, sometimes moving a house is a very cost efficient solution. This depends on the type of property, its size and the final destination. The destination distance plays a big role in the total cost. The longer the distance the more expensive the move will be. Moving a small structure, a few blocks down the road or even to a new neighborhood nearby could very well end up being cheaper than purchasing an actual home.

3. Affordable House Moving Options

Some people are blunt with their reasoning and rightfully so in their own view. They say they do it because they can. Moving a house comes with a hefty price tag and there are many people who can afford to do so willingly at any cost. It certainly is a very expensive luxury but it is there for those who can afford to avail it.

4. Sentimental Value Cannot Be Ignored

There are houses that have enormous sentimental value. They are hundreds of years old, passed on from generation to generation. Some belong to celebrities. Homeowners are simply not willing to part with their heritage regardless of their circumstances. Hence they base their move on sentimental grounds.

5. Preserving History through House Moving

Often times the buildings involved in such moves are of historical nature. It is sometimes necessary to move them due to the nature of their surroundings or due to their own fragile state. While one option is to simply demolish the old building and build an exact replica at a different spot, it still will not have the same aura of a historical building. Therefore many experts advise a building move in order to preserve the actual history instead of just recreating it.

There are many more reasons for moving a house aside from these. However they all have one thing in common - a genuine love for their home or property and house moving companies make sure that that love lasts forever.

Resource:  Wolf E. House

Monday, January 17, 2011

Ground Source Heat Pump Installation

Without carrying out a full building heat loss analysis, and calculating its related energy consumption profile and the hot water requirements of the buildings occupants. You cannot accurately design a ground source heat pump system.

The main problem with many renewable energy installations is, that compared to normal energy systems such as gas/oil or electric, the installed costs are generally much higher, thus meaning the economies of scale are more limited. An oversized Heat pump will spend most of its time running under part load conditions, which can result in a shortening of the equipments lifespan and ultimately affect performance.

Under-sizing can result in a system that requires another heating system to be used, instead of the GSHP during periods of cold weather. This is known as an alternative bivalent system and is not very efficient. A top up system would be required to help the system meet its requirements. Whilst it is in fact fairly normal to have what is known as a parallel bivalent system, where two systems work together during periods of peak loads, the Heat pump will work at maximum output providing the base load of the heating, whilst the other system tops up the temperature levels. It is vitally important to know the buildings and its occupant's energy requirements so that the most energy efficient and therefore cost effective system is designed, as generally the use of non renewable supplementary heating should not exceed 5% of the annual energy requirement.

It's not only the sizing of the heat pump that needs to be considered when designing the system. Different ground conditions will have an affect on the performance of the ground coil or borehole system used to collect heat from the ground. It is widely thought that ground source heat pump systems take their heat from geothermal heat however, this only occurs in a few regions of the UK.

The ground collects solar energy and almost all of the ground heating effect comes from the sun, even up to hundreds of meters below ground level. The type of ground ie, sand/gravel, rock, clay have different levels of heat extraction. Even the moisture levels of the ground will have an effect on the performance and therefore the design of the system.

Without a ground condition survey being carried out one could not even say whether or not a coil system is appropriate. If the ground conditions are such that there is let us say, 1m of topsoil over rock then the cost of the installation will vastly increase.

Resource: Ezine Article

Thursday, January 13, 2011

Top Home Improvement Services

Using a top home improvement service is the smartest way to improve your home no matter how small or big the job is. You could just want to add a fence to your property, or looking to build a garage attached to your house. Both of these home improvements can be trusted with a reputable home improvement contractor that is well trained at adding on to existing homes and remodeling rooms inside the home.

Room additions can be tricky when it comes to the carpentry aspect of it so using a license and insured contractor that has a lot of expertise in room additions will save you money and give you a better end product. The process itself will be professional and done as fast as possible. They do not want to leave any room in your home exposed to elements during the addition process, so working fast and closing off the room is very important.

Improving the kitchen of your home can range from just adding new appliances and countertops to totally gutting it, enlarging it, and adding new appliances, cabinets, countertops, and even flooring. Having a home improvement service remodel your kitchen can really make a large difference for the inside of the home. This also provides more usability of the kitchen because in most cases the kitchen is made larger.

A top home improvement contractor will be very experienced at finishing basements and attics alike. Both of the areas can add a lot of usable space in your home. An attic can be perfect for a private den, a loft area for the kids, or even a home office. The possibilities that you can work with when finishing a basement are never ending. You can add a theater room, bedrooms, a wet bar, a wine cellar, and the list goes on. This is a very popular choice for people that want a lot more space out of their home because it is generally cheap per square foot to finish a basement and add a lot of square feet of living space in the process.

Home improvement services can include a lot of repair work as well as remodeling work. Having a new roof installed is a popular option to make sure all the shingles are accounted for on the roof to prevent leaks. Fixing the siding of a house or updating it can also really help with upholding the value and integrity of your home. Remodeling and improving your home can go along with any budget or can fit any want or need from the homeowner as long as they choose a professional company that offers things like free estimates and has very experienced employees that do all the work with quality in mind.

Resource: Ezine Article

Monday, January 10, 2011

3 Services your House Mover Should Provide

House moving is a huge project that comprises of many services associated with it. This post will go over a few common services that a house mover should and in some cases must provide in order to properly conduct a move. People who are considering moving their house will find the information very useful.

1.    House Moving Estimate

Not all homes are movable. There are numerous structural integrity tests that must be conducted in order to determine if a move is likely. All data is collected and thoroughly analyzed. Armed with that information, a house mover will be able to provide definitely answers about the move along with the costs.

2.    House Raising

Naturally for any house to be moved, it must first be raised. This requires careful planning and a good application of skill and machinery. There is a lot of physics involved in this moving service. With the proper application of strength in the form of heavy duty equipment operated by skilled labor, any house regarding of size can be raised.

3.    House Raising and Repositioning

House moving can be very simple at times especially when all that is needed is a simple repositioning. The process involves raising the foundation of a home and then repositioning it to the desired angle.
These are three common services that are offered by every company in the structural moving industry. As always it is best to do sufficient research about the company and its previous projects before deciding on which company to assign the job.
 




Resource: Illinois House Mover

Friday, January 7, 2011

The Best Heat Pump for You

With the prices of utilities spiraling sky high, you would definitely want to check that you have the best heat pump possible. If you choose the right heat pump, you will be able to cut up to thirty percent from your current heating bill, definitely not a sum to be snubbed. What a heat pump does is transfer heat from one source then move it to your home. Hot air inside the house can be moved to another room if wished. Just being able to maintain the temperature of the home makes it a terrific investment for any homeowner.

Which one is right for your home? Pumps come in many sizes and it's important to choose one in the right size for the room. To compute which one you should get, every 400 square feet of space that is lived in needs a ton to heat the area properly. If the house is properly insulated and has double-glazed windows, then a smaller size heater could be used. A good option is to purchase a heater with variable capacity controls. These will allow the system to adjust to required temperatures, keeping heat in living areas and not heating up unused areas. Apart from saving money over the time it is used, these heaters are much quieter than those that require the blowers running at full all the time.

An air source heat pump is double duty: it can heat the home and cool it as needed. The only problems are its noise while operating and it frosting up when in the winter. A ground source heat pump needs to be buried, since it extracts heat from underground. While expensive and hard to install, these are silent and don't have frost problems. Keep your heat pump in good working order by cleaning and periodically replacing the air filter, at the most every two months. Check in between to see if the filters need cleaning. Have it serviced as the manufacturer recommends. Be sure that the area around the pump is kept clear. Any shrubs or vines, snow, even just leaves and grass, can impair the air flow. Air registers should be clear and open as well - make sure that no furniture or covers are in front of them.

Resource: Ezin Article

Thursday, January 6, 2011

Different Types of Building Materials and Their Characteristics

Any material which is used in construction of residential or commercial buildings is dubbed as building material. The choice of building material depends on the size and nature of building, its design, intended purposes, availability of resources and location. Usually building materials are classified as natural and synthetic materials (where natural materials have minimal or no human intervention in the production and synthetic materials are mostly made by humans). Let's read about some of the most commonly used building materials all over the world.

Rock:

Easily, one of the most solid and durable material used in constructions, the durability is palpable by existence of several centuries old historical buildings made of stone. However, the weight and hardiness that makes the buildings hard-wearing becomes a drawback when it comes to portability and molding. In addition to that, using rock as the primary building material is a bad choice because it stores energy, leaving the inhabitants vulnerable to extreme weather conditions in summer and winters.

Mud & Clay:

Mud and clay are the most commonly used materials in residential buildings. Not as long lasting as rock but far from being fragile. Buildings made primarily of mud and clay can easily endure many years. Using mud and clay in buildings is a very good option for warm places, as it keeps the building reasonably cool even in scorching heat.

Concrete:

Concrete is made by mixing cement, sand, gravel and water, while the structures are made using steel bars. Concrete is another material known for its durability and is on a par with rock when it comes to longevity. At the same time, it is more convenient to use as far as portability and molding is concerned.

Metals & Wood:

Probably the oldest type of building materials is wood. Humans have been using tree logs and other parts of plants to build homes, for ages. Wood obtained from certain plants is quite durable, however low quality wood is open to many extremities. These days wood is mostly used for making cabinets, furniture or wardrobes. Different kinds of materials are put into use for modern structures, with steel being the most common one. Unlike rock it is flexible, while offering the similar level of durability.

Glass & Plastic:

Glass is normally used in doors and windows and occasionally in walls or roofs. Unlike other building materials, glass allows the light to go through, allowing you to make good use of daylight. Plastic is a light, flexible substance, used mostly for piping in buildings.

Resource: Ezine Article

Monday, January 3, 2011

3 Reasons you Should Hire Structural Movers

Moving large structures is one of those tasks that simply cannot be done without the help of professionals. It is a very complicated and demanding task that requires a plethora of structural tests, data analysis and visual observation before the move actually begins. Due to the complexity of the job and the amount of labor and equipment involved, it is an absolute must to hire veteran structural movers for the job. This post will highlight three reasons why homeowners should do so.

1.    They Have The Knowledge – Knowledge is power. Knowing what to do, how and when to do it is a must for house moving. Structural movers are well aware of the rules and regulations as well as county specific laws pertaining to house moving. The will get the work done faster with little or no frustration.

2.    They Have The Man Power – Moving large structures requires a large number house movers with sufficient background in moving residential and commercial buildings. Established structural movers employ adequate manpower in their arsenal to aid them with their moving projects.

3.    They Have the Equipment – Structures simply cannot be moved without sufficient machinery. Modern house moving machines make the entire task easier and smoother. House moving companies take great pride in their equipment. It is what gets the job done after all.

If you are considering moving a house or a building, the above mentioned reasons will help you in giving professional structural movers the job. Get a quote from multiple house movers before finalizing. Always ask about the recently completed projects to get an idea about how good they are and how well they work.

Resource: Structural movers